11.2018
High-Risers in Belye Rosy, Krasnoyarsk, Russia
Following the dynamic trend, the choice for FlowCon was easy. FlowCon offered a flexible, user-friendly and compact solution to secure hydronic balancing and protection against overflow.
Krasnoyarsk, founded in 1928, is today a 1-million-people-city in the Siberian Federal District, Russia, located on the banks of the Yenisei River. Famed for its scenic location, historic Krasnoyarsk is worth a visit if making the trans-Siberian journey. The White Dew’s district with direct access to the river is one of the many emerging residential areas of the city.
![[Translate to Chinese:] FlowCon Project - Belye Rosy, Krasnoyarsk, Russia](/fileadmin/user_upload/Pictures/Projects/FlowCon-Project-Belye-Rosy.jpg "[Translate to Chinese:] Belye Rosy, Krasnoyarsk, Russia")
Project Configurations
| Designer: | FOTON |
| Contractor: | FOTON |
| Equipment Supplier: | POLIMET |
| Project Hame: | Belye Rosy, Krasnoyarsk, Russia |
| Configuration of Building: | Offices, residential apartments and entertainment clubs |
| Valve Model: |
Manifolds for heating FlowCon AB with E-JUST |
| Type of Application: | New building |
| Date of Installation: | September 2012 |
FlowCon Solution:
The involved project includes two high-rise buildings of 25 floors and one U-shaped building of 11 floors. The facility has dynamic valves fitted on each pipe from heating manifolds installed in the two-pipe radiator system. FlowCon AB with E-JUST was chosen working as flow limiter within a given working pressure range and pressure/temperature plugs on the housing offers the possibility of measuring the pressure drop across the valve and thereby verify flow.
The valve assembly includes an E-JUST insert and a valve housing and is supplied as a complete solution for balancing the heating system now as well as a flexible solution for future modifications requiring changes in the heating system.
Operating pressure range: 17-200/400 kPaD (divided over high and low ΔP ranges).
Flow range: 100-5830 l/hr (depending on the selected insert).
Accuracy: greatest of either of ±5% of controlled flow or ±2% of maximum flow.
Each insert holds a minimum of 41 different max. flow rates. This provides the client an easy access to change flow without dismantling the system if such a need arises during operation. Design flow is set directly on the insert using the FlowCon key. The set value on the insert corresponds to a setting in the technote flow table - nice and simple.
The insert-type valves and the availability of caps for flushing the system, greatly supports to the future operation and service of the system.
The use of FlowCon’s dynamic valves has ensured a clear and stable distribution of flow across individual areas of the building, eliminating local system overload. It is not unimportant to note that commissioning time was also decreased to a minimum.
